Síntesis y caracterización de espuma rígida de poliuretano a partir de glicerol crudo y estudio de la influencia de las variables de síntesis sobre sus propiedades
dc.contributor.advisor | Ramírez Caballero, Gustavo Emilio | |
dc.contributor.advisor | Ramírez García, Álvaro | |
dc.contributor.author | Cruz Carrillo, Jessica Ximena | |
dc.contributor.author | Calderon Calderon, Genny Lorena | |
dc.date.accessioned | 2024-03-03T20:35:31Z | |
dc.date.available | 2014 | |
dc.date.available | 2024-03-03T20:35:31Z | |
dc.date.created | 2014 | |
dc.date.issued | 2014 | |
dc.description.abstract | Actualmente debido a la alta producción de glicerol crudo como producto secundario de la industria de biodiesel, se ha visto en este co-producto una oportunidad para la investigación de la síntesis de nuevos materiales de mayor valor agregado. En este trabajo de investigación se realizó la síntesis y caracterización de espuma rígida de poliuretano (PUR) a partir de glicerol crudo, y se estudiaron los efectos que tienen las condiciones de síntesis en las propiedades finales del PUR. Los factores evaluados fueron: cantidad de agua como agente espumante, temperatura de curado y tiempo de reacción entre el glicerol crudo y el diisocianato. Las variables de respuesta evaluadas en el diseño de experimento fueron: dureza, porosidad, conductividad térmica relativa, densidad aparente y se hicieron análisis de espectro infrarrojo (IR) y análisis termo-gravimétrico (TGA). Según los resultados que se obtuvieron, la temperatura de curado fue la variable con mayor influencia sobre las propiedades medidas; a una temperatura de curado de 120°C se observa mayor porosidad y dureza del PUR, mientras que la conductividad térmica y la densidad disminuyen; otro factor que se destaca es el porcentaje volumétrico de agua: a un valor de 4% se observa que la conductividad térmica relativa y la densidad aparente disminuyen, en propiedades como la porosidad y la dureza no se considera influyente. Con el tiempo de gelación de 10min la conductividad térmica relativa y la densidad aparente aumentan, mientras que la porosidad del PUR disminuye; en propiedades como la dureza no fue un factor importante. | |
dc.description.abstractenglish | Currently due to high production of crude glycerol as a byproduct of the biodiesel industry, this co - product has been seen like an opportunity for investigating the synthesis of new materials with higher added value. In this research the synthesis and characterization of rigid polyurethane foam (PUR) from crude glycerol was performed, and the effects of synthesis conditions on the final properties of PUR were studied. Factors assessed were: amount of water as blowing agent, curing temperature and time of reaction between the diisocyanate and crude glycerol. Response variables evaluated in the design of the experiment were: hardness, porosity, relative thermal conductivity bulk density and were made infrared spectral analysis (IR) and thermogravimetric analysis (TGA). According to the results obtained the curing temperature was the variable with the greatest influence on the measured properties; to a curing temperature of 120 °C and hardness greater PUR porosity is observed, while the thermal conductivity and the density decreases, another factor that stands out is the volume fraction of water; to a value of 4% is observed a decrease in the relative thermal conductivity and bulk density, in properties such as porosity and harshness it isn't influential. For a gelation time of 10min, the relative thermal conductivity and bulk density increased while the porosity of PUR decreases; in properties such as hardness it was not a important factor. | |
dc.description.degreelevel | Pregrado | |
dc.description.degreename | Ingeniero Químico | |
dc.format.mimetype | application/pdf | |
dc.identifier.instname | Universidad Industrial de Santander | |
dc.identifier.reponame | Universidad Industrial de Santander | |
dc.identifier.repourl | https://noesis.uis.edu.co | |
dc.identifier.uri | https://noesis.uis.edu.co/handle/20.500.14071/29844 | |
dc.language.iso | spa | |
dc.publisher | Universidad Industrial de Santander | |
dc.publisher.faculty | Facultad de Ingenierías Fisicoquímicas | |
dc.publisher.program | Ingeniería Química | |
dc.publisher.school | Escuela de Ingeniería Química | |
dc.rights | http://creativecommons.org/licenses/by/4.0/ | |
dc.rights.accessrights | info:eu-repo/semantics/openAccess | |
dc.rights.creativecommons | Atribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0) | |
dc.rights.license | Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) | |
dc.rights.uri | http://creativecommons.org/licenses/by-nc/4.0 | |
dc.subject | Espuma De Poliuretano | |
dc.subject | Glicerol Crudo | |
dc.subject | Aislante Térmico. | |
dc.subject.keyword | Polyurethane Foam | |
dc.subject.keyword | Crude Glycerol | |
dc.subject.keyword | Thermal Insulation. | |
dc.title | Síntesis y caracterización de espuma rígida de poliuretano a partir de glicerol crudo y estudio de la influencia de las variables de síntesis sobre sus propiedades | |
dc.title.english | Synthesis and characterization of rigid polyurethane foam from crude glycerol and study of the influence of the variables of synthesis on their properties . | |
dc.type.coar | http://purl.org/coar/version/c_b1a7d7d4d402bcce | |
dc.type.hasversion | http://purl.org/coar/resource_type/c_7a1f | |
dc.type.local | Tesis/Trabajo de grado - Monografía - Pregrado |
Files
Original bundle
1 - 3 of 3
No Thumbnail Available
- Name:
- Carta de autorización.pdf
- Size:
- 855.04 KB
- Format:
- Adobe Portable Document Format
No Thumbnail Available
- Name:
- Nota de proyecto.pdf
- Size:
- 642.03 KB
- Format:
- Adobe Portable Document Format