Evaluación de los parámetros de limpieza del pozo y su impacto en la velocidad de perforación
dc.contributor.advisor | Ariza León, Emiliano | |
dc.contributor.author | Clavijo Martínez, Julián Ricardo | |
dc.contributor.evaluator | Carreño Velasco, Wilson Raúl | |
dc.contributor.evaluator | Villamizar Durán, Raúl | |
dc.date.accessioned | 2022-04-19T15:08:28Z | |
dc.date.available | 2022-04-19T15:08:28Z | |
dc.date.created | 2022-04-05 | |
dc.date.issued | 2022-04-05 | |
dc.description.abstract | Muchos problemas de perforación como pérdida de circulación, obstáculos en la tubería de revestimiento, cementación deficiente, la necesidad de volver a perforar y pegas mecánicas causados por acumulación de cortes en el pozo pueden evitarse mediante una buena limpieza durante la operación de perforación, especialmente en pozos direccionales. Este proyecto está enfocado en analizar los parámetros que influyen de manera directa e indirecta en la limpieza del pozo, así como los problemas operacionales que se presentan debido una inadecuada limpieza, con el fin de optimizar la velocidad de penetración y reducir costos de operación. Los índices de capacidad de carga y de concentración de cortes en el anular son herramientas útiles e importantes que permiten evaluar el proceso de transporte de sólidos a superficie y su relación con la optimización de la velocidad de perforación a partir de parámetros de perforación como las propiedades reológicas del fluido de perforación, el caudal de bombeo y la velocidad anular. Sin embargo, cada índice empleado de manera individual está limitado respecto a la información brindada para relacionar la limpieza de sólidos con la velocidad de perforación. Es por ello que se hace el planteamiento de un nuevo índice de limpieza de hueco que permite analizar y optimizar la ROP en función de las propiedades del lodo, geometría del pozo y caudal de trabajo con adecuada limpieza del hueco, mitigando otros problemas operacionales. | |
dc.description.abstractenglish | Many drilling problems such as loss of circulation, casing obstructions, poor cementing, the need to re-drill, and mechanical stuck caused by cutting accumulation in the wellbore can be avoided by good hole cleaning during the drilling operation. especially in directional wells. This project is focused on analyzing the parameters that directly and indirectly influence the hole cleaning, as well as the operational problems that take place due to inadequate cleaning, in order to optimize the rate of penetration and reduce operating costs. The indexes of currying capacity and cutting concentration in the annulus are two useful and important tools that allow to evaluate the process of transport of solids to the surface and its relationship with the optimization of the rate of penetration from drilling parameters such as rheological properties of the fluid drilling, pumping flow and annular velocity. However, each index used individually is limited in the information provided to relate solid cleanliness to rate of penetration. That is why a new hole cleaning index is proposed to analyze and optimize the ROP based on the properties of the mud, geometry of the well and flow rate with adequate cleaning of the hole, mitigating other operational problems. | |
dc.description.degreelevel | Pregrado | |
dc.description.degreename | Ingeniero de Petróleos | |
dc.format.mimetype | application/pdf | |
dc.identifier.instname | Facultad de Ingeníerias Fisicoquímicas | |
dc.identifier.reponame | Escuela de Ingeniería de Petróleos | |
dc.identifier.repourl | https://noesis.uis.edu.co | |
dc.identifier.uri | https://noesis.uis.edu.co/handle/20.500.14071/9987 | |
dc.language.iso | spa | |
dc.publisher | Universidad Industrial de Santander | |
dc.publisher.faculty | Facultad de Ingeníerias Fisicoquímicas | |
dc.publisher.program | Ingeniería de Petróleos | |
dc.publisher.school | Escuela de Ingeniería de Petróleos | |
dc.rights | info:eu-repo/semantics/openAccess | |
dc.rights.accessrights | info:eu-repo/semantics/openAccess | |
dc.rights.coar | http://purl.org/coar/access_right/c_abf2 | |
dc.rights.creativecommons | Atribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0) | |
dc.rights.license | Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) | |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/4.0/ | |
dc.subject | Índice de capacidad de limpieza de pozo | |
dc.subject | concentración de cortes en el anular | |
dc.subject | velocidad de perforación | |
dc.subject | limpieza del pozo | |
dc.subject.keyword | Carrying capacity index | |
dc.subject.keyword | Cutting concentration in the annulus | |
dc.subject.keyword | Rate of penetration | |
dc.subject.keyword | Hole cleaning | |
dc.title | Evaluación de los parámetros de limpieza del pozo y su impacto en la velocidad de perforación | |
dc.title.english | Evaluation of Hole Cleaning Parameters and their Impact on the Rate of Penetration | |
dc.type.coar | http://purl.org/coar/resource_type/c_7a1f | |
dc.type.hasversion | http://purl.org/coar/version/c_b1a7d7d4d402bcce | |
dc.type.local | Tesis/Trabajo de grado - Monografía - Pregrado | |
dspace.entity.type |
Files
Original bundle
1 - 3 of 3
No Thumbnail Available
- Name:
- Carta de autorización.pdf
- Size:
- 149.48 KB
- Format:
- Adobe Portable Document Format
No Thumbnail Available
- Name:
- Nota de proyecto.pdf
- Size:
- 177.23 KB
- Format:
- Adobe Portable Document Format
License bundle
1 - 1 of 1
No Thumbnail Available
- Name:
- license.txt
- Size:
- 2.18 KB
- Format:
- Item-specific license agreed to upon submission
- Description: