Diseño e implementación de una herramienta software para cálculos de hidráulica como prevención de incidentes operacionales
dc.contributor.advisor | Machuca Boada, Werney de Jesús | |
dc.contributor.advisor | Quintero Silva, Julián Andrés | |
dc.contributor.author | Navarro Infante, Jader Enrique | |
dc.contributor.author | Carrillo Hernández, Jenny Katherine | |
dc.date.accessioned | 2024-03-03T22:12:07Z | |
dc.date.available | 2015 | |
dc.date.available | 2024-03-03T22:12:07Z | |
dc.date.created | 2015 | |
dc.date.issued | 2015 | |
dc.description.abstract | En las operaciones de perforación es fundamental efectuar un hueco estable y permanente para obtener los hidrocarburos del yacimiento. Este tipo de procedimientos se desarrolla mediante un taladro de perforación, en el cual, los sólidos o cortes de la broca del mismo son arrastrados por el lodo y expulsados por la zona anular de la tubería con el objetivo central de limpiar el fondo del pozo. Existen dos maneras de transportar los sólidos del pozo a la superficie; la primera es con el aumento en el caudal del lodo considerando la hidráulica y la segunda involucra, las capacidades de arrastre del lodo, en donde inciden la reología y las propiedades del fluido. Para la ingeniería de petróleos es de vital importancia los cálculos de la hidráulica para mantener un hueco limpio y estable, porque así se garantizara tasas de perforación óptimas, libre rotación de la sarta, riesgo mínimo de pega de tubería, entre otras. Además, durante la etapa de perforación, se pueden presentar diferentes problemas operacionales, causando sobrecostos. Por esto se quiere generar una herramienta confiable y de fácil manejo que permita observar fácilmente los resultados requeridos, el cual beneficiara a los estudiantes ya que serviría como material de apoyo para las clases a estudiantes de pregrado y posgrado. ----------------------------------------------- 1 | |
dc.description.abstractenglish | In drilling operations it is essential to carry out a stable and permanent hole for the oil reservoir. This type of procedure is developed through a drilling rig, in which solid or cuts the bit of it are dragged through the mud and expelled by the annular zone of the pipe with the main objective to clean the bottom hole. There are two ways of transporting solids from the well to the surface; the first is to increase the mud flow considering the hydraulic and the second involves, drag capabilities mud, where affect rheology and fluid properties. For petroleum engineering is vital hydraulic calculations to maintain a clean and stable hole, because this would guarantee optimum drilling rates, free rotation of the drill string, minimal risk of stuck pipe, among others. Also, during the drilling stage, they may to present different operational problems causing cost overruns. This is intended generate a reliable tool and easy to handle that allowing to observe the required results, which will benefit students and to serve as support material for classes to undergraduate and graduate students. ----------------------------------------------- 2 | |
dc.description.degreelevel | Pregrado | |
dc.description.degreename | Ingeniero de Petróleos | |
dc.format.mimetype | application/pdf | |
dc.identifier.instname | Universidad Industrial de Santander | |
dc.identifier.reponame | Universidad Industrial de Santander | |
dc.identifier.repourl | https://noesis.uis.edu.co | |
dc.identifier.uri | https://noesis.uis.edu.co/handle/20.500.14071/33182 | |
dc.language.iso | spa | |
dc.publisher | Universidad Industrial de Santander | |
dc.publisher.faculty | Facultad de Ingenierías Fisicoquímicas | |
dc.publisher.program | Ingeniería de Petróleos | |
dc.publisher.school | Escuela de Ingeniería de Petróleos | |
dc.rights | http://creativecommons.org/licenses/by/4.0/ | |
dc.rights.accessrights | info:eu-repo/semantics/openAccess | |
dc.rights.creativecommons | Atribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0) | |
dc.rights.license | Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) | |
dc.rights.uri | http://creativecommons.org/licenses/by-nc/4.0 | |
dc.subject | Hidráulica | |
dc.subject | Perforación | |
dc.subject | Modelos Reológicos | |
dc.subject | Limpieza De Pozo | |
dc.subject | Perdidas Por Fricción. | |
dc.subject.keyword | Hydraulic | |
dc.subject.keyword | Drilling | |
dc.subject.keyword | Rheological Models | |
dc.subject.keyword | Hole Cleaning | |
dc.subject.keyword | Friction Losses. | |
dc.title | Diseño e implementación de una herramienta software para cálculos de hidráulica como prevención de incidentes operacionales | |
dc.title.english | Design and implementation of a software tool for hydraulic calculations as prevention of incidents operational2 | |
dc.type.coar | http://purl.org/coar/version/c_b1a7d7d4d402bcce | |
dc.type.hasversion | http://purl.org/coar/resource_type/c_7a1f | |
dc.type.local | Tesis/Trabajo de grado - Monografía - Pregrado |
Files
Original bundle
1 - 3 of 3
No Thumbnail Available
- Name:
- Carta de autorización.pdf
- Size:
- 719.96 KB
- Format:
- Adobe Portable Document Format
No Thumbnail Available
- Name:
- Nota de proyecto.pdf
- Size:
- 750.6 KB
- Format:
- Adobe Portable Document Format