Influencia de los parámetros en las propiedades mecánicas de juntas soldadas de aluminio A6061 por soldadura por fricción agitación

dc.contributor.advisorBohorquez Becerra, Oscar Rodolfo
dc.contributor.advisorCristancho Perilla, Robin Alexis
dc.contributor.authorMartinez Portilla, Juan Felipe
dc.contributor.authorOsorio Plata, Danilo Ramcess Alexander
dc.contributor.evaluatorGonzalez Estrada, Octavio Andres
dc.contributor.evaluatorVillegas Bermudez, Diego Fernando
dc.date.accessioned2025-02-24T13:37:09Z
dc.date.available2025-02-24T13:37:09Z
dc.date.created2025-02-21
dc.date.issued2025-02-21
dc.description.abstractEste trabajo de investigación analizó la influencia de los parámetros de soldadura por fricción-agitación FSW sobre las propiedades mecánicas de juntas soldadas de aluminio A6061 de 6 mm de espesor. Se evaluó cómo la velocidad de rotación, la velocidad de avance y la geometría de la herramienta afectan la resistencia a la tracción y la dureza de las juntas soldadas utilizando un diseño factorial de dos factores con tres niveles. Los parámetros fueron seleccionados con base en la literatura existente, adaptados a una fresadora vertical y al material a soldar. Los ensayos de tracción y dureza Vickers se realizaron según las normas ASTM E8/E8M y AST E384, respectivamente. Los resultados experimentales indicaron una disminución de las propiedades mecánicas con respecto al material base, especialmente en la zona central de la soldadura, mientras que las variaciones en la dureza se relacionan directamente con la distribución de calor en la zona de agitación (NZ) y la zona afectada por calor (HAZ). Se establecieron correlaciones matemáticas entre los parámetros de soldadura y las propiedades mecánicas obtenidas. El análisis de varianza (ANOVA) reveló que la velocidad de rotación junto con la velocidad de avance y la interacción de los parámetros tienen un efecto significativo en el esfuerzo último, mientras que el esfuerzo de fluencia y el módulo de elasticidad no mostraron significancia estadística.
dc.description.abstractenglishThis research work studied the influence of friction stir welding (FSW) parameters on the mechanical properties of 6 mm thick A6061 aluminum welded joints. It evaluates how rotational speed; feed rate and tool geometry affected the tensile strength and hardness of the welded joints using a two-factor factorial design with three levels. The parameters were selected based on existing literature, adapted to a vertical milling machine and the material to be welded. Tensile and Vickers hardness tests were carried out according to ASTM E8/E8M and ASTM E384, respectively. Experimental results indicated a decrease in mechanical properties compared to the base material, especially in the center zone of the weld, while variations in hardness are directly related to the heat distribution in the nugget zone (NZ) and the heat affected zone (HAZ). Mathematical correlations were stablished between the welding parameters and the mechanical properties obtained. Analysis of variance (ANOVA) revealed that the rotational speed together with the feed rate, and the interaction of the parameters have a significant effect on the ultimate stress, while the yield stress and the modulus of elasticity did not show statistical significance.
dc.description.degreelevelPregrado
dc.description.degreenameIngeniero Mecánico
dc.format.mimetypeapplication/pdf
dc.identifier.instnameUniversidad Industrial de Santander
dc.identifier.reponameUniversidad Industrial de Santander
dc.identifier.repourlhttps://noesis.uis.edu.co
dc.identifier.urihttps://noesis.uis.edu.co/handle/20.500.14071/45060
dc.language.isospa
dc.publisherUniversidad Industrial de Santander
dc.publisher.facultyFacultad de Ingeníerias Fisicomecánicas
dc.publisher.programIngeniería Mecánica
dc.publisher.schoolEscuela de Ingeniería Mecánica
dc.rightsinfo:eu-repo/semantics/openAccess
dc.rights.accessrightsinfo:eu-repo/semantics/openAccess
dc.rights.coarhttp://purl.org/coar/access_right/c_f1cf
dc.rights.creativecommonsAtribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0)
dc.rights.licenseAtribución-SinDerivadas 2.5 Colombia (CC BY-ND 2.5 CO)
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/
dc.subjectSoldadura por fricción-agitación
dc.subjectaluminio A6061
dc.subjectparámetros de soldadura
dc.subjectpropiedades mecánicas
dc.subjectresistencia a la tracción
dc.subjectdureza Vickers
dc.subject.keywordFriction Stir Welding
dc.subject.keywordaluminum A6061
dc.subject.keywordwelding parameters
dc.subject.keywordmechanical properties
dc.subject.keywordtensile strength
dc.subject.keywordVickers hardness
dc.titleInfluencia de los parámetros en las propiedades mecánicas de juntas soldadas de aluminio A6061 por soldadura por fricción agitación
dc.title.englishInfluence of parameters on the mechanical properties of A6061 aluminum welded joints by Friction Stir Welding
dc.type.coarhttp://purl.org/coar/resource_type/c_7a1f
dc.type.hasversionhttp://purl.org/coar/version/c_b1a7d7d4d402bcce
dc.type.localTesis/Trabajo de grado - Monografía - Pregrado
Files
Original bundle
Now showing 1 - 4 of 4
No Thumbnail Available
Name:
Documento
Size:
2.93 MB
Format:
Adobe Portable Document Format
No Thumbnail Available
Name:
Carta de autorización.pdf
Size:
192.74 KB
Format:
Adobe Portable Document Format
No Thumbnail Available
Name:
Nota de proyecto.pdf
Size:
464.43 KB
Format:
Adobe Portable Document Format
No Thumbnail Available
Name:
Apéndices.rar
Size:
8.34 MB
Format:
Unknown data format
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
2.18 KB
Format:
Item-specific license agreed to upon submission
Description: