Análisis preliminar del impacto de la distribución aleatoria de partículas en el proceso de compactación sobre el comportamiento mecánico de material granular marginal (MGM-7, MGM-8, MGM-9 Y MGM-10) y convencional (SBG-C0 Y SBG-C1)

dc.contributor.advisorÁlvarez Lugo, Allex Eduardo
dc.contributor.advisorMerchán Jaimes, Vladimir Ernesto
dc.contributor.authorAgudelo Jaimes, Deiver Mauricio
dc.contributor.authorSerrano Sanchez, Stefania Lizeth
dc.contributor.evaluatorCastañeda Pinzón, Eduardo Alberto
dc.contributor.evaluatorCapacho Silva, Luis Alberto
dc.date.accessioned2025-02-28T12:07:58Z
dc.date.available2025-02-28T12:07:58Z
dc.date.created2025-02-26
dc.date.embargoEnd2030-02-26
dc.date.issued2025-02-26
dc.description.abstractEste trabajo de investigación se centra en el análisis del impacto de la distribución aleatoria de partículas durante el proceso de compactación sobre el comportamiento mecánicos de los materiales granulares marginales (MGM-7, MGM-8, MGM-9, MGM-10) y convencionales (SBG-C0 y SBGC-1). Durante este trabajo se estudiaron las propiedades de resistencia mecánica a la tracción indirecta (RTI), a la compresión inconfinada (RCI) y la rigidez en condición cíclica a partir del módulo resiliente determinado mediante el ensayo triaxial dinámico. Los resultados mostraron que la distribución de las partículas influye de manera significativa en la capacidad de los materiales para resistir esfuerzos y deformaciones, pues los especímenes compactados con distribución aleatoria de partículas sólidas presentan en mayoría una menor resistencia mecánica ante los ensayos estáticos en comparación con aquellos sometidos a segregación de partículas gruesas en el núcleo realizados en estudios anteriores. Por otra parte, para el caso del ensayo dinámico, se presentó una mayor respuesta por parte de los materiales compactados con distribución aleatoria frente a los materiales con segregación de partículas gruesas. Este comportamiento destaca la importancia de un control adecuado de la granulometría y distribución de esta para optimizar el desempeño de los materiales. El estudio concluye que, independientemente de si los MGM presentan una distribución aleatoria o segregada, estos destacan en comparación con la subbase de control SBG-C0 en términos de RTI y RCI. Sin embargo, los MGM no alcanzaron los niveles de rigidez obtenidos por la SBG-C0, que cumple con las especificaciones técnicas establecidas por instituciones locales. Por otro lado, la subbase SBG-C1 presentó mayor resistencia en RTI y RCI en comparación con los MGM de distribución aleatoria, aunque estos últimos superaron a la SBG-C1 parcialmente en rigidez. Finalmente, estos resultados contribuyen a la línea de investigación relacionada con el estudio de materiales alternativos para estructuras de pavimento.
dc.description.abstractenglishThis research work focuses on the analysis of the impact of random particle distribution during the compaction process on the mechanical behavior of marginal granular materials (MGM-7, MGM-8, MGM-9, MGM-10) and conventional granular materials (SBG-C0 and SBGC-1). During this work, the mechanical strength properties of indirect tensile strength (ITS), unconfined compressive strength (UCS), and stiffness under cyclic conditions were studied based on the resilient modulus determined through the dynamic triaxial test. The results showed that particle distribution has a significant influence on the capacity of materials to resist stresses and deformations, since compacted specimens with random distribution of solid particles show mostly a lower mechanical strength in static tests compared to those subjected to coarse particle segregation in the core performed in previous studies. On the other hand, in the case of the dynamic test, a greater response was presented by the compacted materials with random distribution compared to the materials with coarse particle segregation. This behavior highlights the importance of adequate control of the granulometry and distribution of this to optimize the performance of the materials. The study concludes that, regardless of whether the MGM presents a random or segregated distribution, they stand out compared to the SBG-C0 control subbase in terms of RTI and RCI. However, the MGM did not reach the stiffness levels obtained by SBG-C0, which complies with the technical specifications established by local institutions. On the other hand, the SBG-C1 subbase presented higher resistance in RTI and RCI compared to the randomly distributed MGM, although the latter partially surpassed SBG-C1 in stiffness. Finally, these results contribute to the line of research related to the study of alternative materials for pavement structures.
dc.description.degreelevelPregrado
dc.description.degreenameIngeniero Civil
dc.format.mimetypeapplication/pdf
dc.identifier.instnameUniversidad Industrial de Santander
dc.identifier.reponameUniversidad Industrial de Santander
dc.identifier.repourlhttps://noesis.uis.edu.co
dc.identifier.urihttps://noesis.uis.edu.co/handle/20.500.14071/45135
dc.language.isospa
dc.publisherUniversidad Industrial de Santander
dc.publisher.facultyFacultad de Ingeníerias Fisicomecánicas
dc.publisher.programIngeniería Civil
dc.publisher.schoolEscuela de Ingenieria Civil
dc.rightsinfo:eu-repo/semantics/embargoedAccess
dc.rights.accessrightsinfo:eu-repo/semantics/openAccess
dc.rights.coarhttp://purl.org/coar/access_right/c_f1cf
dc.rights.creativecommonsAtribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0)
dc.rights.licenseAtribución-NoComercial-SinDerivadas 2.5 Colombia (CC BY-NC-ND 2.5 CO)
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/
dc.subjectMaterial Granular Marginal (MGM)
dc.subjectSubbase Granular de Control (SBG-C)
dc.subjectDistribución Aleatoria de Partículas
dc.subjectEnsayo de Tracción Indirecta
dc.subjectEnsayo de Compresión Inconfinada
dc.subjectMódulo Resiliente
dc.subject.keywordMarginal Granular Material (MGM)
dc.subject.keywordGranular Control Subbase (SBG-C)
dc.subject.keywordRandom Particle Distribution Indirect Tensile Test
dc.subject.keywordUniaxial Compression Test
dc.subject.keywordResilient Modulus.
dc.titleAnálisis preliminar del impacto de la distribución aleatoria de partículas en el proceso de compactación sobre el comportamiento mecánico de material granular marginal (MGM-7, MGM-8, MGM-9 Y MGM-10) y convencional (SBG-C0 Y SBG-C1)
dc.title.englishPreliminary analysis of the impact of random particle distribution in the compaction process on the mechanical behavior of marginal granular material (MGM-7, MGM-8, MGM-9 Y MGM-10) and conventional material (SBG-C0 Y SBG-C1)
dc.type.coarhttp://purl.org/coar/resource_type/c_7a1f
dc.type.hasversionhttp://purl.org/coar/version/c_b1a7d7d4d402bcce
dc.type.localTesis/Trabajo de grado - Monografía - Pregrado
Files
Original bundle
Now showing 1 - 4 of 4
No Thumbnail Available
Name:
Nota Proyecto.pdf
Size:
131.97 KB
Format:
Adobe Portable Document Format
No Thumbnail Available
Name:
Carta Autorizacion.pdf
Size:
116.1 KB
Format:
Adobe Portable Document Format
No Thumbnail Available
Name:
Carta Confidencialidad.pdf
Size:
113.86 KB
Format:
Adobe Portable Document Format
No Thumbnail Available
Name:
Documento.pdf
Size:
2.8 MB
Format:
Adobe Portable Document Format
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
2.18 KB
Format:
Item-specific license agreed to upon submission
Description: