Modelado y simulación de una planta power-to-gas

dc.contributor.advisorQuiroga Quiroga, Oscar Arnulfo
dc.contributor.advisorSerna Suárez, Iván David
dc.contributor.authorAguas Ramírez, Wilmer Adrián
dc.contributor.authorParra Jaimes, Yuli Andrea
dc.date.accessioned2024-03-04T01:16:56Z
dc.date.available2021
dc.date.available2024-03-04T01:16:56Z
dc.date.created2021
dc.date.issued2021
dc.description.abstractActualmente, el gobierno colombiano está apoyando más que nunca la integración de las energías renovables en el sistema nacional de transmisión eléctrica. Ahora bien, debido a la variabilidad de las plantas de electricidad renovable solar y eólica, a la falta de almacenamiento rentable a nivel de transmisión y a la necesidad de equilibrar la demanda y la generación en tiempo real, algunos de estos recursos renovables podrían verse reducidos. Por lo tanto, para aprovechar al máximo los recursos renovables variables se puede utilizar el proceso de convertir la electricidad en un vector químico, por ejemplo, mediante la electrólisis. Sin embargo, para cuantificar el alcance de los beneficios y el impacto en la red de tales iniciativas, es necesario establecer un entorno de simulación adecuado. Este trabajo presenta la simulación de un electrolizador alcalino avanzado utilizado para la producción de hidrógeno a partir de energía renovable solar fotovoltaica restringida en un sistema eléctrico. Los resultados obtenidos muestran el comportamiento del modelo de una planta Power to Gas capaz de simular la producción de hidrogeno mediante una señal de potencia de entrada que representa los excedentes de energía renovable de una planta solar fotovoltaica, igualmente se observa el comportamiento de un sistema de potencia de prueba al realizar la incorporación de una planta fotovoltaica hasta el punto de tener restricciones de cargabilidad y ser compensadas mediante la incorporación de la planta Power to Gas.
dc.description.abstractenglishCurrently, Colombian government is supporting more than ever the integration of renewable energy in the national electricity transmission system. Now, due to the variability of the solar and wind renewable electricity plants, the lack of costefficient insitu storage at transmission level, and the need to balance demand and generation in real time, some of these renewable resources might be curtailed. Therefore, to fully exploit variable renewable resources one may use the process of converting electricity to a chemical vector, e.g., through electrolysis. However, to quantify the extend of the benefits and impact on the grid of such initiatives, a proper simulation environment must be set. This work presents the simulation of an advanced alkaline electrolyzer used for the production of hydrogen from curtailed solar photovoltaic renewable energy in a power system. The results obtained show the behavior of the model of a Power to Gas plant capable of simulating the production of hydrogen through an input power signal that represents the surplus of renewable energy from a solar photovoltaic plant. Likewise, the behavior of a test power system is observed when incorporating a photovoltaic plant to the point of having loadability restrictions and being compensated by the incorporation of the Power to Gas plant.
dc.description.degreelevelPregrado
dc.description.degreenameIngeniero Electricista
dc.format.mimetypeapplication/pdf
dc.identifier.instnameUniversidad Industrial de Santander
dc.identifier.reponameUniversidad Industrial de Santander
dc.identifier.repourlhttps://noesis.uis.edu.co
dc.identifier.urihttps://noesis.uis.edu.co/handle/20.500.14071/41494
dc.language.isospa
dc.publisherUniversidad Industrial de Santander
dc.publisher.facultyFacultad de Ingenierías Fisicomecánicas
dc.publisher.programIngeniería Eléctrica
dc.publisher.schoolEscuela de Ingenierías Eléctrica, Electrónica y Telecomunicaciones
dc.rightshttp://creativecommons.org/licenses/by/4.0/
dc.rights.accessrightsinfo:eu-repo/semantics/openAccess
dc.rights.creativecommonsAtribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0)
dc.rights.licenseAttribution-NonCommercial 4.0 International (CC BY-NC 4.0)
dc.rights.urihttp://creativecommons.org/licenses/by-nc/4.0
dc.subjectProyecto
dc.subjectEnergía Renovable
dc.subjectGas Natural Sintético
dc.subjectPower to Gas
dc.subject.keywordProject
dc.subject.keywordRenewable Energy
dc.subject.keywordSynthetic Natural Gas
dc.subject.keywordPower to Gas
dc.titleModelado y simulación de una planta power-to-gas
dc.title.englishModeling and simulation of a Power to Gas plant
dc.type.coarhttp://purl.org/coar/version/c_b1a7d7d4d402bcce
dc.type.hasversionhttp://purl.org/coar/resource_type/c_7a1f
dc.type.localTesis/Trabajo de grado - Monografía - Pregrado
Files
Original bundle
Now showing 1 - 3 of 3
No Thumbnail Available
Name:
Carta de autorización.pdf
Size:
145.4 KB
Format:
Adobe Portable Document Format
No Thumbnail Available
Name:
Documento.pdf
Size:
1.61 MB
Format:
Adobe Portable Document Format
No Thumbnail Available
Name:
Nota de proyecto.pdf
Size:
115.85 KB
Format:
Adobe Portable Document Format