Logotipo del repositorio

Publicación:
Evaluación del módulo de elasticidad de la mampostería utilizada en Bucaramanga mediante ensayos de muretes

dc.contributor.advisorChio Cho, Gustavo
dc.contributor.advisorLópez Morantes, Elkin Mauricio
dc.contributor.authorOsma Vargas, Brayam Doney
dc.contributor.authorHernnadez Cortes, Gustavo Adolfo
dc.date.accessioned2024-03-03T20:44:31Z
dc.date.available2014
dc.date.available2024-03-03T20:44:31Z
dc.date.created2014
dc.date.issued2014
dc.description.abstractEn este proyecto de investigación, se propuso determinar las curvas de comportamiento esfuerzo deformación y evaluar el módulo de elasticidad de muretes construidos con unidades de mampostería representativas de la ciudad de Bucaramanga mediante ensayos de laboratorio; Se analizó y comparo el comportamiento de tres tipos de ladrillo de perforación horizontal y macizos en arcilla como el H10, H15 y Tolete, mediante ensayos de laboratorio que permitieron conocer las características y propiedades de los materiales que integran los elementos estructurales, analizando principalmente el módulo de elasticidad y la resistencia a la compresión, como parámetros que influyen en forma directa en la rigidez de la edificación y que concuerdan con las investigaciones de Hemant B. et al [1] y Takeuchi C. [2], bajo el Código Colombiano de Construcción Sismo Resistente de 2010 (NSR-10), cuyos resultados servirán de aporte en el ámbito investigativo debido a que en la práctica profesional existe una gran discrepancia en los modelos para el análisis de estructuras de mampostería y dichos modelos conducen a fuerzas de diseño imprecisas. Los resultados obtenidos serán utilizados para evaluar las curvas de comportamiento de una vivienda de mampostería típica de la región y estos son la base para las curvas de fragilidad utilizadas en los estudios de vulnerabilidad y riesgo.
dc.description.abstractenglishThis research Project, was proposed to determine the performance curves stress [MPa] vs. unit strain [mm / mm] This has evaluated the modulus of elasticity of low walls built with masonry units that are representative of the city of Bucaramanga by means of laboratory tests, it Was analyzed and compared the behavior of three types of brick of horizontal drilling and solid of clay such as the H10, H15 and Tolete, through laboratory testing. That allowed to determine the characteristics and properties of materials making up the structural elements in laboratory tests, analyzing principally the modulus of elasticity and compressive strength, as parameters that influence directly in the stiffness of the building and consistent with research of Hemant B. et al [1] and C. Takeuchi [2], controlled by the Colombian Seismic Resistant Building Code 2010 (NSR-10) [3], whose results will be additive in the research field because in professional practice there is a wide discrepancy in the models for the analysis of masonry structures and these models lead to imprecise design forces. The results obtained will be used to evaluate the performance curves of typical masonry housing of the region and these are the foundation for the fragility curves used in studies of vulnerability and risk
dc.description.degreelevelPregrado
dc.description.degreenameIngeniero Civil
dc.format.mimetypeapplication/pdf
dc.identifier.instnameUniversidad Industrial de Santander
dc.identifier.reponameUniversidad Industrial de Santander
dc.identifier.repourlhttps://noesis.uis.edu.co
dc.identifier.urihttps://noesis.uis.edu.co/handle/20.500.14071/30838
dc.language.isospa
dc.publisherUniversidad Industrial de Santander
dc.publisher.facultyFacultad de Ingenierías Fisicomecánicas
dc.publisher.programIngeniería Civil
dc.publisher.schoolEscuela de Ingeniería Civil
dc.rightshttp://creativecommons.org/licenses/by/4.0/
dc.rights.accessrightsinfo:eu-repo/semantics/openAccess
dc.rights.creativecommonsAtribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0)
dc.rights.licenseAttribution-NonCommercial 4.0 International (CC BY-NC 4.0)
dc.rights.urihttp://creativecommons.org/licenses/by-nc/4.0
dc.subjectMurete
dc.subjectMortero De Pega
dc.subjectModulo De Elasticidad
dc.subjectResistencia A La Compresión
dc.subjectUnidades De Mampostería
dc.subjectCompresión Diagonal
dc.subjectY Esfuerzo.
dc.subject.keywordLow Walls Mortar Paste
dc.subject.keywordModulus Of Elasticity
dc.subject.keywordCompressive Strength
dc.subject.keywordMasonry Units
dc.subject.keywordDiagonal Compression
dc.subject.keywordAnd Stress.
dc.titleEvaluación del módulo de elasticidad de la mampostería utilizada en Bucaramanga mediante ensayos de muretes
dc.title.englishEvaluation module for elasticity of masonry used in Bucaramanga testing by low walls
dc.type.coarhttp://purl.org/coar/version/c_b1a7d7d4d402bcce
dc.type.hasversionhttp://purl.org/coar/resource_type/c_7a1f
dc.type.localTesis/Trabajo de grado - Monografía - Pregrado
dspace.entity.typePublication

Archivos

Bloque original

Mostrando 1 - 3 de 3
Cargando...
Miniatura
Nombre:
Carta de autorización.pdf
Tamaño:
270.03 KB
Formato:
Adobe Portable Document Format
Cargando...
Miniatura
Nombre:
Documento.pdf
Tamaño:
3.91 MB
Formato:
Adobe Portable Document Format
Cargando...
Miniatura
Nombre:
Nota de proyecto.pdf
Tamaño:
140.54 KB
Formato:
Adobe Portable Document Format

VIGILADA MINEDUCACIÓN

Ordenanza No. 83 de 1.944 (junio 22)

Carácter académico: Universidad

Notificaciones judiciales: notjudiciales@uis.edu.co 

.

Código SNIES: 1204   Nit: 890.201.213-4

Línea Anticorrupción:  +57 (601) 562 9300 EXT: 3633

Línea transparente: +57 (607) 630 3031