Logotipo del repositorio

Publicación:
COMPARACIÓN PRELIMINAR DE LA RESPUESTA MECÁNICA DE MATERIALES GRANULARES MARGINALES, IDENTIFICADAS COMO MGM-7 AL 10, SBG-C0 Y SBGC1, EMPLEANDO PROBETAS CON DISTRIBUCIÓN ALEATORIA DE SÓLIDOS Y DISTRIBUCIÓN SEGREGAD DE SÓLIDOS

dc.contributor.advisorAlvarez Lugo, Allex Eduardo
dc.contributor.advisorBautista Prada, Emily
dc.contributor.authorArias Salazar, Luz Amanda
dc.contributor.authorOsorio Galvis, Karen Viviana
dc.contributor.evaluatorMerchan Jaimes, Vladimir Ernesto
dc.contributor.evaluatorLopez Parra, Jhonatan steevens
dc.date.accessioned2025-08-13T12:12:06Z
dc.date.available2025-08-13T12:12:06Z
dc.date.created2025-08-12
dc.date.embargoEnd2030-08-12
dc.date.issued2025-08-12
dc.description.abstractEste trabajo de investigación evalúa el comportamiento mecánico de materiales granulares marginales (MGM 7 al 10) y subbases convencionales (SBG-C0 y SBG-C1), con especial énfasis en el efecto de la distribución aleatoria y segregada de partículas durante la compactación. Para adelantar esta caracterización mecánica se realizaron ensayos de resistencia a la tracción indirecta (RTI), resistencia a la compresión inconfinada (RCI), y medición del módulo resiliente (MR) mediante el ensayo triaxial dinámico. Las probetas utilizadas, de forma cilíndrica con aproximadamente 150 mm de diámetro y 200 mm de altura, fueron compactadas con dos configuraciones de partículas, una con distribución aleatoria de los sólidos y otra con distribución segregada, esta última caracterizada por contar con un núcleo reforzado de partículas gruesas rodeado por finos. Los resultados evidenciaron que la distribución de las partículas afecta significativamente los parámetros de respuesta mecánica de los materiales. En general, las muestras compactadas con distribución aleatoria mostraron menores resistencias en compresión inconfinada y tracción indirecta en comparación con las muestras con partículas segregadas. Por otra parte, en los ensayos dinámicos, los materiales con distribución aleatoria presentaron una rigidez inferior frente a las muestras con núcleo reforzado (i.e., segregadas). Finalmente, este estudio concluye que, bajo cargas estáticas, los materiales granulares marginales ofrecen mayor resistencia a la compresión y a la tracción que el material de control SBG-C0, independientemente de la configuración de las partículas. Sin embargo, en condiciones de carga dinámica, los MGM no lograron igualar la rigidez del material de control. Estos hallazgos contribuyen al análisis de materiales alternativos para la construcción de estructuras de pavimento en vías de bajo tránsito.
dc.description.abstractenglish​​This research study evaluates the mechanical behavior of marginal granular materials (MGM 7 to 10) and conventional subbases (SBG-C0 and SBG-C1), with special emphasis on the effect of random and segregated particle distribution during compaction. To carry out this mechanical characterization, tests were conducted for indirect tensile strength (ITS), unconfined compressive strength (UCS), and resilient modulus (MR) using dynamic triaxial testing. The specimens used were cylindrical, approximately 150 mm in diameter and 200 mm in height, and were compacted using two particle configurations: one with a random distribution of solids and the other with a segregated distribution, the latter characterized by a reinforced core of coarse particles surrounded by fines. ​The results showed that particle distribution significantly affects the mechanical response parameters of the materials. In general, specimens compacted with random distribution showed lower unconfined compressive and indirect tensile strengths compared to specimens with segregated particles. Furthermore, in dynamic tests, materials with random distribution exhibited lower stiffness compared to specimens with a reinforced core (i.e., segregated). Finally, this study concludes that under static loading conditions, marginal granular materials offer greater compressive and tensile strength than the control material SBG-C0, regardless of particle configuration. However, under dynamic loading conditions, the MGM materials did not achieve the stiffness of the control material. These findings contribute to the analysis of alternative materials for the construction of pavement structures on low-traffic roads. ​​
dc.description.degreelevelPregrado
dc.description.degreenameIngeniero Civil
dc.format.mimetypeapplication/pdf
dc.identifier.instnameUniversidad Industrial de Santander
dc.identifier.reponameUniversidad Industrial de Santander
dc.identifier.repourlhttps://noesis.uis.edu.co
dc.identifier.urihttps://noesis.uis.edu.co/handle/20.500.14071/45857
dc.language.isospa
dc.publisherUniversidad Industrial de Santander
dc.publisher.facultyFacultad de Ingeníerias Fisicomecánicas
dc.publisher.programIngeniería Civil
dc.publisher.schoolEscuela de Ingenieria Civil
dc.rightsinfo:eu-repo/semantics/embargoedAccess
dc.rights.accessrightsinfo:eu-repo/semantics/openAccess
dc.rights.coarhttp://purl.org/coar/access_right/c_f1cf
dc.rights.creativecommonsAtribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0)
dc.rights.licenseAtribución-NoComercial 2.5 Colombia (CC BY-NC 2.5 CO)
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/
dc.subjectmaterial granular marginal (MGM)
dc.subjectsubbase granular
dc.subjectdistribución aleatoria de partículas
dc.subjectdistribución segregada de partículas
dc.subjecttracción indirecta
dc.subjectcompresión inconfinada
dc.subjectmódulo resiliente
dc.subjectvías terciarias.
dc.subject.keywordmarginal granular material (MGM)
dc.subject.keywordgranular subbase (SBG)
dc.subject.keywordrandom particle distribution
dc.subject.keywordindirect tensile strength test
dc.subject.keywordunconfined compression test
dc.subject.keywordresilient modulus
dc.titleCOMPARACIÓN PRELIMINAR DE LA RESPUESTA MECÁNICA DE MATERIALES GRANULARES MARGINALES, IDENTIFICADAS COMO MGM-7 AL 10, SBG-C0 Y SBGC1, EMPLEANDO PROBETAS CON DISTRIBUCIÓN ALEATORIA DE SÓLIDOS Y DISTRIBUCIÓN SEGREGAD DE SÓLIDOS
dc.title.englishPreliminary Comparison of the Mechanical Response of Marginal Granular Materials Identified as MGM-7 to 10, SBG-C0 and SBG-C1, Using Specimens with Random and Segregated Distribution of Solids
dc.type.coarhttp://purl.org/coar/resource_type/c_7a1f
dc.type.hasversionhttp://purl.org/coar/version/c_b1a7d7d4d402bcce
dc.type.localTesis/Trabajo de grado - Monografía - Pregrado
dspace.entity.typePublication

Archivos

Bloque original

Mostrando 1 - 5 de 5
Cargando...
Miniatura
Nombre:
Nota de Proyecto.pdf
Tamaño:
314.77 KB
Formato:
Adobe Portable Document Format
Cargando...
Miniatura
Nombre:
Carta de autorización..pdf
Tamaño:
161.68 KB
Formato:
Adobe Portable Document Format
Cargando...
Miniatura
Nombre:
Carta de autorización.pdf
Tamaño:
169.89 KB
Formato:
Adobe Portable Document Format
Cargando...
Miniatura
Nombre:
Carta de Confidencialidad.pdf
Tamaño:
331.53 KB
Formato:
Adobe Portable Document Format
Cargando...
Miniatura
Nombre:
Documento.pdf
Tamaño:
1.11 MB
Formato:
Adobe Portable Document Format

Bloque de licencias

Mostrando 1 - 1 de 1
Cargando...
Miniatura
Nombre:
license.txt
Tamaño:
2.18 KB
Formato:
Item-specific license agreed to upon submission
Descripción:

VIGILADA MINEDUCACIÓN

Ordenanza No. 83 de 1.944 (junio 22)

Carácter académico: Universidad

Notificaciones judiciales: notjudiciales@uis.edu.co 

.

Código SNIES: 1204   Nit: 890.201.213-4

Línea Anticorrupción:  +57 (601) 562 9300 EXT: 3633

Línea transparente: +57 (607) 630 3031